What To Expect When Repiping a House In California?

The repiping process is one of the most common repair projects in the world today. When a home is experiencing problems with plumbing, homeowners are often told to repipe their homes. You may need a repiping process at least a few times in a lifetime.

Repiping occurs when all or part of the piping within your home’s water supply system needs to be replaced. There are several reasons your home may require repiping, which is why it is essential to have an experienced Bellflower repiping plumber involved.

In this blog post, you will know 6 steps every repiping specialist takes when repiping a house so you can be ready when the time comes.

First Plumber Inspection

The first thing the repiping specialist should do is to go to your house to check the current condition of your pipes. If they need replacement, the specialist will inform you and tell you the options for new pipes you can consider. The type of pipe you opt for usually determines the length of the repair project.

The plumber will also let you know the list of access points they will need during the project, such as walls, floors, etc.

This initial inspection is necessary to know what’s the real problem with your plumbing system. This way, you can be prepared once the plumber starts the repairs.

Creating a Schedule

Any home repair job can be intrusive for you and your family. You see workers coming and going through the bathroom, living room, or kitchen while dealing with noises and dust. You will probably have ladders and other tools around, making another annoyance for the house.

To avoid this problem, you have to create an efficient and safe schedule with your Chula Vista repiping plumber. This schedule should allow them to work every day but without disrupting your home life too much.

Once the schedule is done, try to stick with it so the project can go smoothly.

Create a Safe Workspace In Your House

Before removing or installing any piping system, the plumbers have to do all the necessary prep work first. They will have to make many holes in walls, floors, and ceilings to access the water system. Therefore, they must consult with you on the best ways to cover any furniture so it does not get dirty or torn.

They should lay down drop cloths on the floors, and they should use essential materials to cover delicate surfaces too. Additionally, you should empty your cabinets and remove obstacles before the workers arrive. This way, you will save a lot of time for everyone.

If you have children, don’t forget to remove their toys from the floor!

Time To Install The New Pipes

Now that the prep work is done, the work crew will start the installation. The time required for it will depend on the type of pipe you are using. Most homeowners use PEX or copper pipes, but remember to consult with the Escondido repiping company first.

PEX pipes are easier and quicker to install because they are not heavy. Plus, they are flexible in comparison to copper pipes. PEX pipes don’t need elbow fittings, and the plumber doesn’t need to weld anything either. However, pipes that are entering or exiting a wall should be copper.

You don’t have to stress about running out of water during the process. The old system remains until the new one is fully installed.

Changing The Old Pipe System To The New One

Switching from the old water system to the new one is the most difficult part, so it takes longer than other steps in the process. During this step, the plumber must remove the tie-ins to the city water system from the old pipes to tie into the new ones.

If some areas in your house need water first, such as the bathroom, the work crew will switch over those areas first.

Cleaning Up

Once the work crew finishes installing the new system, the final step is to clean everything. This step includes patching and repairing walls, floors and ceilings that needed to be cut through.

They will also remove the drop cloths and sweep up debris. If you hired the right Fountain Valley repiping company, they will leave your house exactly as it was.

Finding The Right California Repiping Company

We know that finding a trusted repiping company is not always easy. That is why we recommend you contact the experts at Integrity Repipe. We have over 26 years of experience offering top-quality repiping and plumbing services in Southern California. Contact us now to get started!



Published by – Integrity Repipe Inc

Integrity Repipe Inc – Mission Viejo, CA
27281 Las Ramblas, Suite 200
Mission Viejo, CA 92691
Phone: 877-473-7473
Website: integrityrepipe.com

Integrity Repipe Inc – San Clemente, CA
927 Calle Negocio Suite O
San Clemente, CA 92673
Phone: 949-397-2404
Website: integrityrepipe.com/san-clemente

Integrity Repipe Inc – Long Beach, CA
2201 N Lakewood Blvd, Ste D #297
Long Beach, CA 90815
Phone: 562-362-5040
Website: integrityrepipe.com/long-beach

Integrity Repipe Inc – Chula Vista, CA
591 Telegraph Canyon Road
Chula Vista, CA 91910
Phone: 619-313-5744
Website: integrityrepipe.com/chula-vista

Integrity Repipe Inc – Ladera Ranch, CA
27762 Antonio Parkway L1
Ladera Ranch, CA 92694
Phone: 949-397-2795
Website: integrityrepipe.com/ladera-ranch

Integrity Repipe Inc – Lakeside, CA
8337 Winter Gardens Boulevard
Lakeside, CA 92040
Phone: 619-494-3507
Website: integrityrepipe.com/lakeside

Integrity Repipe Inc – Aliso Viejo, CA
27068 La Paz Rd #771
Aliso Viejo, CA 92656
Phone: 949-449-1142
Website: integrityrepiping.com/aliso-viejo-repipe-copper-pex-ca

Integrity Repipe Inc – Oceanside, CA
1759 Oceanside Blvd C,
Oceanside, CA 92054
Phone: 442-300-3057
Website: integrityrepiping.com/oceanside-repipe-copper-pex

Integrity Repipe Inc – Porter Ranch, CA
19360 Rinaldi
Porter Ranch, CA 91326
Phone: 818-630-9265
Website: integrityrepiping.com/porter-ranch/