Bigger Pipes Are Not Always The Answer To Increase Water Pressure

Do you have a home with low water pressure? Is it frustrating doing basic tasks like taking a shower or washing dishes? If so, you’re not alone. 

Many things can cause low water pressure, and one of the most common is a lack of tension in your pipes. If you’re looking for ways to increase water pressure, you may be surprised to learn that bigger pipes are not always the answer.

Our Chula Vista repiping company will explain below why bigger pipes aren’t always the solution to increasing water pressure.


Are Bigger Pipes Always Better?

Yes and no. Larger pipes increase the water flow through the line, but if the water isn’t up to that necessary flow, it won’t increase your water pressure.

Municipal water systems have impressive pressure, but that doesn’t mean a larger line can help. Bigger lines do not always help things get faster o stronger.

Water flow is more important to analyze than pipe size. Water flow is the amount of water coming through a pipe. The more water flowing through a line, the more pressure the water will have. 

The pipe must be large enough to stand the water flow from the other side. Nonetheless, too much pressure can cause significant tightness on pipes. Larger lines can carry more water, but they will cause more stress. Still, smaller tubes can reach the same pressure faster.

Why Is The Correct Water Pressure Important?

You probably don’t enjoy a hot shower will low water pressure. You may ignore it at first, but as soon you see the difference while showering or washing the dishes, you realize how necessary water pressure is. It can make you call a Fountain Valley repiping company almost immediately! 

Its importance extends beyond comfort. Your plumbing system needs balanced water pressure for many reasons, including preservation. 

Proper water pressure preserves your pipes. Your plumbing and piping system needs the correct pressure to flow sucessfully throughout the day. If the pressure is too low or high, it can damage your tubes, including fixtures, pipes, sump pumps, etc. 

What Is The Ideal Water Pressure For A Home?

Ideally, the water pressure should be 45 to 65 pounds per square inch (PSI). With that setting, water should have a smooth and balanced flow. Instead of trickling or spouting, water flows continuously through the pipes. 

The water pressure should never exceed 80 PSI. If it exceeds that number and reaches 100 PSI, it could cause serious damage to your piping and plumbing system.

What’s The Difference Between Dynamic Pressure And Static Pressure?

Static pressure is a continuous water flow coming from the size and dynamics of the pipes. The pressure remains the same, and its limitations work according to what the water flow can do. Generally speaking, the type, size, and use of the lines control the maximum and minimum pressure. 

It’s not easy to identify the type of pressure. Only a professional Lakewood repiping company can help. 

Changing water flow impacts dynamic pressure. The line will be closer to its maximum allowance if more water flows through the pipe. If you exceed that allowance, you’ll hear strange sounds from your pipes. Besides, water lines will burst. 

You cannot link a colossal pipe to a small line because their pressures are too different. That’s why you should always keep relatively shrinking sizes from the main lines. 

What Should I Do If My Water Pressure Is Not The Right One?

Correcting water pressure requires technical expertise and knowledge. Only a licensed plumber can help you with this issue. 

However, you can do a quick check-up at home to know what’s happening in your plumbing system. You can notice high or low water pressure by flushing the toilet or running the water from the faucet. 

You can also check if your house has a water pressure regulator. It is usually located near the shut-off valve on the main water line. Adjust the regulator to 45 or 65 PSI if necessary. 

Contact A California Repiping Company

If your water pressure doesn’t change with anything you do, you must contact a specialist for plumbing repair services. At Integrity Repipe we can do our best to solve this issue! We can inspect your system, diagnose the problem, and fix the water pressure so you can enjoy your water flow as it should be.

Contact us now for more help! 


Published by – Integrity Repipe Inc

Integrity Repipe Inc – Mission Viejo, CA
27281 Las Ramblas, Suite 200
Mission Viejo, CA 92691
Phone: 877-473-7473

Integrity Repipe Inc – San Clemente, CA
927 Calle Negocio Suite O
San Clemente, CA 92673
Phone: 949-397-2404

Integrity Repipe Inc – Long Beach, CA
2201 N Lakewood Blvd, Ste D #297
Long Beach, CA 90815
Phone: 562-362-5040

Integrity Repipe Inc – Chula Vista, CA
591 Telegraph Canyon Road
Chula Vista, CA 91910
Phone: 619-313-5744

Integrity Repipe Inc – Ladera Ranch, CA
27762 Antonio Parkway L1
Ladera Ranch, CA 92694
Phone: 949-397-2795

Integrity Repipe Inc – Lakeside, CA
8337 Winter Gardens Boulevard
Lakeside, CA 92040
Phone: 619-494-3507

Integrity Repipe Inc – Aliso Viejo, CA
27068 La Paz Rd #771
Aliso Viejo, CA 92656
Phone: 949-449-1142

Integrity Repipe Inc – Oceanside, CA
1759 Oceanside Blvd C,
Oceanside, CA 92054
Phone: 442-300-3057

Integrity Repipe Inc – Porter Ranch, CA
19360 Rinaldi
Porter Ranch, CA 91326
Phone: 818-630-9265