High Water Pressure Can Lead To Expensive Damages

High-pressure water can seem inoffensive at first, but it can be dangerous to your plumbing fixtures, especially your pipes. You may feel relaxed when using high-pressure water to wash your car, or when cleaning the sink, but it has a lot of flaws.

An Anaheim repiping plumber explains below how high water pressure can damage your piping systems. Take note of this information to keep your pipes in good condition.

Pipe with high-pressure water in California

You Waste Too Much Water

Having high-pressure water often means losing a lot of water. As a result, your water bills increase, and at the same time, you may cause a shortage of water for you and your neighbors.

You should try to save money when using water, and the best for that is to avoid using high water pressure. Besides, if you want to be a responsible citizen, then be sure to preserve natural resources instead of wasting them.

Several Damages To Your Piping System

The worst disadvantage of using high-pressure water is the damage your plumbing fixtures receive. It can easily damage your pipes and other plumbing fixtures you have.

High water pressure is what makes the pipes crack and break. This issue can affect most of your piping system, and in the end, you may spend a lot of money on repairs and replacements. In short, you could end up paying too much just because of the high pressure. Check the pressure of your water supply and take proper action to avoid damage. Contact a Carson repiping company if you want to make sure everything’s ok with your piping system.

Be aware that your fixtures may also get damaged from high water pressure. That includes taps, toilets, and showerheads. High-pressured water can make the toilets and faucets drip continuously.

Be Sure To Have The Right Water Pressure

Although high-pressure water seems soothing due to its direct effect on surfaces (including sometimes forming bubbles), it is not the most suitable for preserving pipes.

You have to get the right water pressure to take care of your piping system. The right water pressure should be less than 60 pounds per square inch (PSI). If your water pressure goes above that, then it is too high and it might cause damage to your plumbing fixtures and piping systems.

How To Identify If You Have High Water Pressure

Now that you know the damage of high-pressure water, you are ready to see if you have it at home. Some indicators can tell if there’s high-pressure water in your house, so stay alert to them.

Your Pipes Make Noisy Sounds

Banging sounds from your pipes may indicate there’s high water pressure. To make sure that’s the issue, always contact a Buena Park repiping plumber first.

Your pipes will make noisy sounds if the water passing through goes with high pressure. Be alert to these sounds because they indicate your pipes are likely to face damage soon.

Your Toilets Are Running Continuously

This is another indicator of high-pressure water. If your toilets run continuously, your water pressure might be higher than 60 PSI. If you don’t want to spend a lot of money on damage, stay alert to your running toilets.

Remember that prevention is always the best solution, so once you see something different in your toilets, contact a professional to act timely and reduce costs in the future.

Leaking Faucets

If you notice your faucets leak at specific times of the day or when you finish using them, be sure to get your water pressure checked. Leaky faucets are another sign of high water pressure.

This issue can cause further damage to your piping system and plumbing fixtures. The best you can do is to check your faucets once in a while and contact a plumber if they start leaking.

Contact A California Repiping Company

If you see any of the previous signs at home, contact a professional immediately to avoid further damage. At Integrity Repipe we can help you solve any issues you have with your plumbing and piping system.

Integrity Repipe is a local-owned company with over 26 years of experience in top-quality repiping and plumbing services. We offer fast installations, Lifetime transferable warranties, 3-4 day turnarounds, and the best USA materials for our services. Contact us now to get a FREE in-house estimate!


Published by – Integrity Repipe Inc

Integrity Repipe Inc – Mission Viejo, CA
27281 Las Ramblas, Suite 200
Mission Viejo, CA 92691
Phone: 877-473-7473
Website: integrityrepipe.com

Integrity Repipe Inc – San Clemente, CA
927 Calle Negocio Suite O
San Clemente, CA 92673
Phone: 949-397-2404
Website: integrityrepipe.com/san-clemente

Integrity Repipe Inc – Long Beach, CA
2201 N Lakewood Blvd, Ste D #297
Long Beach, CA 90815
Phone: 562-362-5040
Website: integrityrepipe.com/long-beach

Integrity Repipe Inc – Chula Vista, CA
591 Telegraph Canyon Road
Chula Vista, CA 91910
Phone: 619-313-5744
Website: integrityrepipe.com/chula-vista

Integrity Repipe Inc – Ladera Ranch, CA
27762 Antonio Parkway L1
Ladera Ranch, CA 92694
Phone: 949-397-2795
Website: integrityrepipe.com/ladera-ranch

Integrity Repipe Inc – Lakeside, CA
8337 Winter Gardens Boulevard
Lakeside, CA 92040
Phone: 619-494-3507
Website: integrityrepipe.com/lakeside

Integrity Repipe Inc – Aliso Viejo, CA
27068 La Paz Rd #771
Aliso Viejo, CA 92656
Phone: 949-449-1142
Website: integrityrepiping.com/aliso-viejo-repipe-copper-pex-ca

Integrity Repipe Inc – Oceanside, CA
1759 Oceanside Blvd C,
Oceanside, CA 92054
Phone: 442-300-3057
Website: integrityrepiping.com/oceanside-repipe-copper-pex

Integrity Repipe Inc – Porter Ranch, CA
19360 Rinaldi
Porter Ranch, CA 91326
Phone: 818-630-9265
Website: integrityrepiping.com/porter-ranch/