Salt Water Corrosion and How It Affects Your Plumbing in Long Beach
Many settle down in Long Beach for the beautiful scenery and the easy-going way of life that being near the ocean offers. Yet living next to the beach has its drawbacks, too – especially the closer you live to the shore. The salt water that you might love to smell as the tide wafts over the breeze can also be damaging to your home and especially to your plumbing.
If your pipes are corroded because of exposure to salt water, you will need to call a plumbing company near Long Beach as soon as possible. Leaving that damage unchecked can lead to leaks and other problems that can cause catastrophic damage to your home. Get repair or re-piping as soon as possible to protect your home and save yourself a lot of money in the long run.
Types of Piping and Corrosion
Your plumbing may experience more or less corrosion, depending on what type of materials were used for the pipes. Copper pipes are the most vulnerable to corrosion from exposure to salt water. The copper reacts with the salt, which can change the structure of the material. Galvanized steel and cast iron also react to salt water exposure, but they are a little more resistant than copper. Finally, plastic is the most resistant material of all. Plastic can be exposed to salt water for long periods with little to no effect.
It is important that you identify the type of plumbing you have as soon as possible so that you can know what signs of corrosion to monitor. It is also important that you identify the vulnerabilities in your plumbing, including where it is exposed to salt water, such as outside. You will also know when you have to be more careful of your plumbing with certain activities, such as cleaning items that have been saturated with salt water.
Signs of Corrosion
The signs that your pipes have been corroded by salt water depend on the material. Copper pipes will start to turn a greenish blue when they have been corroded. Over time, the damage will be much worse. The copper will start to become brittle, and it will eventually flake or peel. At some point, the pipe will burst or crack.
Salt water corrosion in steel or iron pipes is best identified by the water coming out of your faucets. You will notice a red or brownish tint to the water. If the water is running, you may not notice it. But when you fill a cup of water to drink or a pot to cook, the difference will be more obvious.
Sometimes, these signs can be caused by something other than salt water corrosion, and sometimes the pipes can be damaged by salt water without showing any of these signs. The best thing you can do is call a Long Beach plumber right away if you notice signs of any problems. You should also have a plumber perform regular inspections to discover signs of salt water corrosion or other problems while they are in the early stages and can be repaired more easily (and cheaply).
Repairing Corroded Pipes
Corroded pipes need the attention of an experienced plumber near Long Beach immediately. If corrosion if left unchecked, it can lead to serious problems that can damage your entire plumbing system and your home. Depending on the severity of the damage, you may need complete Long Beach re-piping, or you may just need to replace a section or two.